5 Hot Water Heater Repair Tips You Should Know
If you’re like most homeowners, you probably rely on your hot water heater to heat your home during the winter. But as we all know, nothing is invincible, and eventually your water heater may need some TLC. If you’re not careful, repairing or replacing your hot water heater could end up costing you more in the long run. To help you out, we’ve collected five hot water heater repair tips that will help you keep your costs down and get your water heating system up and running as quickly and efficiently as possible.
What to do if you think your water heater is broken
If you think your water heater is broken, there are a few things you can do to figure out if it is indeed the problem. First, make sure all of the valves on the unit are closed and that all of the wires are connected. Second, turn off the main water line to the house and check for leaks. If there are no leaks, then your water heater may be the problem. If there are leaks, then you will need to have a technician come out and check it out.
How to test your water heater
There are a few ways to test your water heater, depending on the type of water heater. If you have a gas water heater, you can use a gas or electric meter to test the amount of heat being produced. If you have an electric water heater, you can check the breaker box to see if there is power going to the unit. If you have a propane water heater, you can check the propane tanks for leaks or improper usage.
When to call a water heater repairman
When you experience a water heater issue, the first thing to do is check your temperature. If the water is too hot or too cold, calling a professional may be necessary. Here are some telltale signs that you need help:
-Your water is coming out of the faucet at an unusually high or low temperature
-There is steam coming from under your kitchen sink
-You smell gas in your home
If you experience any of these signs, it’s time to call a professional. Depending on the issue, your water may need to be turned off while a repairman is on the scene.
How to replace a water heater thermostat
If your water heater thermostat is not working, you will need to replace it. There are a few different types of thermostats, so be sure to know what type yours is before you start. The following steps will help you replace your water heater thermostat:
1. Open the front cover of the water heater.
2. Remove the old thermostat by unscrewing it from the wall.
3. Replace the old thermostat with a new one by screwing it in place.
4. Replace the cover and tighten screws.
5. Test the thermostat by turning it on and off.
If you have any questions or problems replacing your water heater thermostat, please don’t hesitate to contact a technician at your local service center.
What to do if the water from your hot water tank isn’t hot
If your hot water tank is not supplying hot water, there are a few things you can do to try and fix the problem. First, make sure that the water valve is properly closed. If the valve is not closing properly, it could be allowing cold water into the tank. If this is the case, you may need to replace the valve. Second, if there is an obstruction in the pipe leading from the tank to the house, you may need to clear it out. Finally, if all of these measures fail and you still have no hot water, you may need to replace the tank.